Skip header and navigation and go directly to page content.

Graduate Theses

F. Jahani, Department of Mechanical Engineering, Attenuation of Weak Shock Waves in
        Fibrous and Granular Materials, (M.S.) 1987.

Y. Han, Department of Mechanical Engineering, A Statistical Analysis of Light Blockage
        Sizing Techniques, (M.S.) 1987.

A. Ndayizeye, Department of Mechanical Engineering, The Influence of Size Distribution
        on Explosibility: An Experimental Investigation and Regression Analysis, (M.S.)
        1987.

M. Haworth, Department of Mechanical Engineering, Morphological Analysis of Quasi-
        Statically Compacted Sucrose Crystals, (M.S.) 1988.

K. Montz, Department of Chemical and Materials Engineering, Particulate Removal
        Using High-Intensity Acoustic Waves, (Ph.D., Co-Advisor) 1988.

R. Schmitt, Department of Mechanical Engineering, Multicomponent, Multiphase Flow
        Analysis, (M.S.) 1990.

J.Z. Yao, Department of Mechanical Engineering, Analysis of Particle-Laden Gaseous
        Shock Waves, (Ph.D.) 1989.

L.J. Chen, Department of Mechanical Engineering, Shock Propagation and Shock
        Initiated Reaction in Granular Energetic Materials, (Ph.D.) 1990.

J. Kang, Department of Mechanical Engineering, A Thermo-Mechanical Analysis of Hot-
        Spot Formation in Condensed-Phase, Energetic Materials, (Ph.D.) 1991.

M. Kodumudi, Department of Mechanical Engineering, Real Gas Equations of State in
        Reaction Kinetics, (M.S.) 1992.

V. Pai, Department of Mechanical Engineering, A Numerical Model of Supercritical H2O
        Oxidation in a Tubular Reactor, (M.S.) 1993.

C. Greenlee, Department of Mechanical Engineering, Influence of Product Species on
        Thermochemical Equilibrium Calculations for Energetic Materials, (M.S.) 1993.

R.G. Schmitt, Department of Mechanical Engineering, Analysis of Gas-Phase Detonation
        Wave Structure at Elevated Initial Pressures, (Ph.D.) 1994.

D. Bonnett, Department of Mechanical Engineering, A Thermochemical Transport Model
        for Hotspot Formation in Energetic Materials, (M.S.) 1995.

M.K. Alkam, Department of Mechanical Engineering, Ignition of Solid Energetic Materials
        by Hot Gas Impingement, (Ph.D.) 1995.

J. Clay, Department of Mechanical Engineering, Design of a Small Spacecraft Thermal
        Analysis, (M.S., Co-Advisor) 1995.

M. Schneider, Department of Mechanical Engineering, Modeling Shock-Induced Hot Spot
        Formation and Ignition in Condensed-Phase Energetic Materials, (M.S.) 1996.

P. Green, Department of Mechanical Engineering, Ignition Temperature Prediction of
        Stoichiometric Methane-Air and Oxygen Mixtures up to 100 Bar, (M.S.) 1997.

J. Freesmeier, Department of Mechanical Engineering, Analysis of a Dual Combustion
        Chamber Gas Generator Used in Automotive Airbag Systems, (M.S.) 1997.

D. Crosby, Department of Mechanical Engineering, Numerical Analysis of a High-
        Velocity Oxygen-Fuel Thermal Spray Torch, (M.S.) 1998.

Z. Xiong, Department of Mechanical Engineering, Study of Aspiration Effects in Model
        Airbag Modules, (M.S., Co-Advisor) 2001.

P. Green, Department of Mechanical Engineering, Flow Aspiration During Airbag
        Deployment, (Ph.D.) 2001.

K. Ramadan, Department of Mechanical Engineering, A Computational Study of Pulsed
        Thermal Spraying, (Ph.D.) 2002.

J.Cannon, Department of Mechanical and Industrial Engineering, Thermal Efficiency
        Delivery of a Detonation Induced Pulse Jet, (M.S.) 2007.

The University of Iowa College of Engineering