homepage TEACHING and outreach PUBLICATIONS research GROUP contact
                                                                                 
publications

Popular Press

  1. Featured in Iowa Engineer (Link)
  2. Video "Printing Life" (Link) Story on ScienceDaily, March 2013 (Link) 
  3. Featured in ITU Ariyorum (Link) 
  4. Featured in The Gazette (Link) 
  5. Featured on Front Page of Citizen-Press (Link) 
  6. Story on KGAN TV, March 2013 (Link). 
  7. Story in Iowa Now, March 2013 (Link). 
  8. Featured Video in UI TV, February 2013 (Link). 
  9. Featured Article in Daily Iowan Newspaper, February 2013 (Link). 
  10. Featured in Science and Technology Magazine (in Turkish), Ozbolat, I.T., "Towards Artificial Organ Printing", The
  11. Scientific and Technological Research Council of Turkey, Sept. 2012, 58-61 (Link). 
  12. Featured in Industrial Engineering,  Ozbolat, I.T., and Chen, H., "Manufacturing Living Things" 45(1), pp. 30-34 (Link) 
  13. Featured in Mechanical Engineer, Thilmany, J., "Printed Life", 134(1): pp. 44-47. (Link)

Book Chapters

  1. Ozbolat, I.T., "Biomanufacturing" in "Manufacturing Engineering & Technology", Pearson, ISBN 10: 1256487619.
Papers in Preperation for Submission (Summer 2013)
  1. Dolati, F., Zhang, Y., Yu, Y., De Jesus, A., Sander, E., and Ozbolat, I.T., "Characterization of Carbon-Nano Tube Reinforced Vascular constructs" (To be Submitted to Nanotechnology).
  2. Dababneh, A., Marler, T., and Ozbolat, I.T., "A Board Level Lifetime Prognostic Environemt for In-Service Circuit Cards" (To be Submitted to ASME Electronic Packaging).
  3. Zhang, Y., Yu, Y., and Ozbolat, I.T., "Printable Vasculature Embedded Hydrogels for Tissue Engineering" (To be Submitted to Biomaterials).
  4. Yu, Y., Zhang, Y., and Ozbolat, I.T., "Bioprintable Microfluidic Channels for Tissue Engineering" (To be Submitted to Lab-on-A Chip).
Journal Papers

  1. Chen, H. and Ozbolat, I.T., "Development of 'Multi-arm Bioprinter' for Hybrid Biofabrication of Tissue Engineering Constructs" (Submitted to ASME Transactions on Manufacturing Science and Engineering).
  2. Zhang, Y., Yin, Y and Ozbolat, I.T. "Direct Bioprinting of Vessel-like Tubular Microfluidic Channels", ASME Journal of Nanotechnology in Engineering and Medicine (In Press) .
  3. Dababneh, A and Ozbolat, IT "A Virtual Predictive Environment for Reliability and Maintainability Monitoring of Printed Circuit Boards" Computer-Aided Design and Applications (Accepted).
  4. Samanta, K., Ozbolat, I.T. and Koc, B., 2011, "Geometric Blending between two Geometric Features by Optimized Normal and Distance Matching for Heterogeneous Object Modeling," (Under Review).
  5. Yu, Y., Zhang, Y., Martin, J. and Ozbolat, I.T., Evaluation of Cell Viability and Functionality in Vessel-like Bioprintable  Cell Laden Tubular Channels.", ASME Journal of Biomechanical Engineering (In Press).  
  6. Zhang, Y, Yu, Y., and Ozbolat, I.T., "Predictive Study of Bioprinting Parameters for Fabrication of Tubular Vascular Network" ASME Transactions Micro and Nano-manufacturing (Submitted).
  7. Khoda, A.K.M.B., Ozbolat, I.T. and Koc, B., 2013, "Designing Heterogeneous Porous Tissue Scaffolds for Bio-additive Processes" Computer-Aided Design (Accepted).
  8. Ozbolat, I.T., "Path Planning Algorithms for Functionally Graded Material Printing in Hollowed Tissue Scaffold Fabrication (Submitted). 
  9. Ozbolat, I.T., Marchany, Gardella Jr.,J.A. and Koc, B., 2013, "Computer-aided 4D Modeling of Hydrolytic Degradation Kinetics in Micro-patterned Bioresorbable Membranes," ASME Transactions, Journal of Medical Devices (In Press). 
  10. Khoda, AKMB, Ozbolat, I.T., and Koc, B., 2013, "Modeling of Variational Gradient Porous Architecture with Multi-directional Filament Deposition in 3D Scaffolds ", Journal of Computer-aided Design & Applications; 10(3), 445-459.
  11. Ozbolat, I.T., Yu, Y., 2013, "Bioprinting towards Organ Fabrication: Challanges and Future Trends" IEEE Transactions on Biomedical Engineering; 60(3): 1-9. 
  12. Zhang, Y, Yu, Y., Chen, H., and Ozbolat, I.T., 2013, "Characterization of Printable Cellular Micro-fluidic Channels for Tissue Engineering" Biofabrication ; 5(2): 024004. 
  13. Ozbolat I.T, Khoda, AKMB, Marchany, M., Gardella, J., and Koc, B, 2012, "Hybrid Tissue Scaffolds for Controlled Release Applications," Journal of Virtual and Physical Prototyping; 7(1): pp. 37-47.
  14. Ozbolat, I.T. and Koc, B., 2012, "3D Hybrid Wound Devices for Spatiotemporarily Controlled Release Kinetics," Computer Methods and Programs in Biomedicine; 108(3): 922-931.
  15. Ozbolat, I.T., Debabneh, A., Elgaali, O., Zhang, Y., Marler, T.F.and Turek., S., 2012, "A Model Based Enterprise Approach in Electronics Manufacturing: Predictive Environment for Visualization of Electromechanical Virtual Validation", Journal of Computer-aided Design & Applications; 9(6); 847-856. 
  16. Khoda, A.K.M.B., Ozbolat, I.T. and Koc, B., 2011, "A new Functionally Gradient Controlled Porosity Architecture for Hollowed Scaffold Design," Biofabrication; 3(3): pp. 034106.
  17. Ozbolat, I.T. and Koc, B., 2011, "A Continuous Multi-material Toolpath Planning for Tissue Scaffolds with Hollowed Features," Journal of Computer-aided Design & Applications; 8(2); 237-247. 
  18. Ozbolat, I.T. and Koc, B., 2011, "Multi-directional Blending for Heterogeneous Objects", Journal of Computer-aided Design; 43(8): 863-875. 
  19. Ozbolat, I.T. and Koc, B., 2011, "Multi-function Based Modeling of 3D Heterogeneous Wound Scaffolds for Improved Wound Healing," Journal of Computer-aided Design & Applications; 8(1): pp. 43-57. 
  20. Khoda, A.K.M.B., Ozbolat, I.T. and Koc, B., 2011, "Engineered Tissue Scaffolds with Variational Porous Architecture," ASME Transactions, Journal of Biomechanical Engineering; 133(1): 011001(1)-011001(12).
  21. Ozbolat, I.T. and Koc, B., 2010, "Modeling of Spatially Controlled Biomolecules in Three Dimensional Porous Alginate Structures," ASME Transactions, Journal of Medical Devices; 4(4): pp. 041003(1)-041003(11).
  22. Ozbolat, I.T., Marchany, M., Bright, F.V., Cartwright, A.N., Gardella Jr.,J.A., Hard, R., Hicks, Jr. W.L. and Koc, B., 2009, "Feature-based Design of Bio-degradable Micro-patterned Structures," Journal of Computer-aided Design & Applications; 6(5): pp. 661-671.

Conference Proceedings (Full Paper)

  1. Yu, Y. and Ozbolat, I.T., "Bioprinting-induced Cell Damage Analysis in Micro-fluidic Channel Biofabrication", Proceedings of 8th ASME Manufacturing Science and Engineering Conference, June 10-14, 2013, Wisconsin, Madison.
  2. Chen, H. and Ozbolat, I.T., "Development of a Multi-Arm Bioprinter for Concurrent Multi-Material Deposition", Proceedings of 8th ASME Manufacturing Science and Engineering Conference, June 10-14, 2013, Wisconsin, Madison.
  3. Zhang, Y, Yu, Y. Ozbolat, I.T., "Characterization of Printable Microfluidic Channels for Organ Printing", Proceedings of 8th ASME Manufacturing Science and Engineering Conference, June 10-14, 2013, Wisconsin, Madison.
  4. Zhang, Y, Yu, Y. Ozbolat, I.T., "Characterization of Vessel-like Printable Cellular Microfluidic Channels", Proceedings of Annual Industrial and Systems Engineering Research Conference, ISERC 2013, May 18-22, 2013, San Juan, Puerto Rico.
  5. Dababneh, A., Ozbolat, I.T., "Board Level Reliability and Maintainability Modeling of Printed Circuit Boards", Proceedings of Annual Industrial and Systems Engineering Research Conference, ISERC 2013, May 18-22, 2013, San Juan, Puerto Rico.
  6. Chen, H., and Ozbolat, I.T., "A multi-material Bioprinting Platform towards Stratified Articular Cartilage Tissue Fabrication", Proceedings of Annual Industrial and Systems Engineering Research Conference, ISERC 2013, May 18-22, 2013, San Juan, Puerto Rico.
  7. Ozbolat, I.T., "3D Functional Organ Printing: Promises and Future Challenges", Proceedings of Annual Industrial and Systems Engineering Research Conference, ISERC 2013, May 18-22, 2013, San Juan, Puerto Rico.
  8. Yu, Y., Ozbolat, I.T., "Experimental characterization of Printing-induced Cell Damage in Blood Vessel-like Cellular Channels towards 3D Organ Printing", Proceedings of Annual Industrial and Systems Engineering Research Conference, ISERC 2013, May 18-22, 2013, San Juan, Puerto Rico.
  9. Khoda, A.K.M.B., Ozbolat, I.T. and Koc, B., "Functionally Gradient Tissue Scaffold Design and Deposition Path Planning for Bio-additive Processes", Proceedings of Annual Industrial and Systems Engineering Research Conference, ISERC 2013, May 18-22, 2013, San Juan, Puerto Rico.
  10. Ozbolat, I.T., Khoda, A.K.M.B. and Koc, B., "Spatiotemporally Controlled Hybrid Scaffolds for Improved Tissue Regeneration" International Mechanical Engineering Congress & Exposition (IMECE 2012), Nov 9-15, Houston, Texas.
  11. Ozbolat, I.T., Koc, B., and Deng, Y., "Multi-directional Material Blending for Heterogeneous Object Modeling", International Mechanical Engineering Congress & Exposition (IMECE 2012), Nov 9-15, Houston, Texas.
  12. Zhang, Y, Chen, H., and Ozbolat, I.T., "Characterization of Printable Micro-fludic Channels for Organ Printing" International Mechanical Engineering Congress & Exposition (IMECE 2012), Nov 9-15, Houston, Texas.
  13. Khoda, A.K.M.B., Ozbolat, I.T. and Koc, B., "Modeling of Porous Architecture with Anisotropic Pores" International Mechanical Engineering Congress & Exposition (IMECE 2012), Nov 9-15, Houston, Texas.
  14. Ozbolat, I.T., Zhang, Y., Debabneh, A., Marler, T.F. "A Model Based Enterprise Environment in Electronics Manufacturing", International Mechanical Engineering Congress & Exposition (IMECE 2012), Nov 9-15, Houston, Texas.
  15. Elgaali, O., Zhang, Y., and Ozbolat, I.T., "Multi-functional Hybrid Tissue Scaffolds", Proceedings of Annual Industrial and Systems Engineering Research Conference, ISERC 2012, May 19-23, 2012, Orlando, FL.
  16. Marler, T., Abdel-Malek, K., Beck, S., Butler, L., Capdevila, N., Coventon, M., Goerdt, B., Johnson, R., Lineback, R., Mathai, A., Murphy, A., Ozbolat, I., Reininga, H., Turek, S. “The Predictive Environment for Visualization of Electromechanical Virtual Validation”, Defense Manufacturing Conference, Nov 27-Dec 1 2011, Anaheim, California.
  17. Ozbolat, I.T., Elgaali, O., Zhang, Y., Debabneh, A., Marler, T.F., "A Model Based Manufacturing Environment for Assessing Virtual Performance of Printed Circuit Boards", Proceedings of Annual Industrial and Systems Engineering Research Conference, ISERC 2012, May 19-23, 2012, Orlando, FL.
  18. Khoda, AKMB, Ozbolat I.T and Koc B., 2011, "Bio-Mimetically Designed Functionally Gradient Pore Generation with Continuous Path Plan for Hollowed Tissue Scaffolds," 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, Sept 28-Oct 1, Portugal.
  19. Ozbolat I.T, Khoda, AKMB, Marchany, M., Gardella, J., and Koc, B, 2011, "Multi-functional Tissue Scaffolds for Controlled Release Applications," 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, Sept 28-Oct 1, Portugal.
  20. Koc B. and Ozbolat I.T, 2011, "Multi-material Blending for Complex-Shaped Heterogeneous Objects," 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, Sept 28-Oct 1, Portugal.
  21. Khoda, AKMB, Ozbolat, I.T. and Koc, B., 2011, "Modeling and Fabrication of Hollowed Scaffolds with Interconnected Variational Porosity Architecture," International Mechanical Engineering Congress & Exposition (IMECE), Nov 11-17, Denver, Colorado.
  22. Ozbolat, I.T. and Koc, B., 2011, "Hybrid Wound Devices for Spatiotemporally Controlled Release Kinetics", International Mechanical Engineering Congress & Exposition (IMECE), Nov 11-17, Denver, Colorado.
  23. Ozbolat, I.T, 2011, "Path Planning for Functionally Graded Materials in Hollowed Tissue Scaffold Printing", International Mechanical Engineering Congress & Exposition (IMECE), Nov 11-17, Denver, Colorado.
  24. Khoda, AKMB, Koc, B., and Ozbolat, I.T., 2011, "Continuous Path Planning for Variational Porosity in Hollowed Scaffold Fabrication," Industrial Engineering Research Conference, IERC 2011, May 21-25, Reno, Nevada.
  25. Ozbolat, I.T. and Koc, B., 2011, "3D Engineered Wound Scaffolds for Spatiotemporally Controlled Release Kinetics," Industrial Engineering Research Conference, IERC 2011, May 21-25, Reno, Nevada.
  26. Ozbolat, I.T. and Koc, B., 2011, "Multi-directional Material Blending for Heterogeneous Object Modeling," Industrial Engineering Research Conference, IERC 2011, May 21-25, Reno, Nevada.
  27. Ozbolat, I.T. and Koc, B., 2011, "A new Toolpath Planning in Solid Freeform Fabrication for Hollowed Objects," Industrial Engineering Research Conference, IERC 2011, May 21-25, Reno, Nevada.
  28. Marchany M.D., Gardella Jr.,J.A., Ozbolat I., Koc B., "Determination of Spatially Resolved Hydrolytic Degradation Kinetics of a Micropatterned Bioresorbable Polyester Membrane", 17th International Conference on Secondary Ion Mass Spectrometry, SIMS XVII. Sept 14-18,2009, Toronto, Canada.
  29. Ozbolat. I.T., Khoda, AKMB., and Koc, B. "Toolpath optimization in Solid Freeform Modeling and Fabrication for Tissue Engineering" , Industrial Engineering Research Conference, IERC 2010. June 5- 9, 2010, Cancun, Mexico.
  30. Ozbolat. I.T., and Koc, B. "Spatially controlled Biomolecules in 3D Porous Structures" , Industrial Engineering Research Conference, IERC 2010. June 5- 9, 2010, Cancun, Mexico.
  31. Ozbolat, I.T., Marchany, M., Gardella, J. A. Jr., and Koc, B., “Computer-aided Bio-modeling of Micro-patterned Structures for Tissue Engineering”, Industrial Engineering Research Conference, IERC 2009. May 30- June 3, 2009, Miami, Florida.
  32. Ozbolat, I.T., Khoda, A.K.M.B., and Koc, B., “Geometric Modeling of Tissue Engineering Scaffolds with Controlled Porosity Level”, Industrial Engineering Research Conference, IERC 2009. May 30- June 3, 2009, Miami, Florida.